Supported Sensors(old)

PowerTune digital dashes are compatible with any vehicle using the following ECU:
- Haltech - Link/Vipec - AEM - Motec - ECU Master - Megasquirt 2/3 - MaxxECU - Hondata S300 V3 + KPRO V4 - Fueltech - Microtech C series - Adaptronic Modular - Emtron - EMS Engine Management Systems - Motorsport Electronics - Wolf - EMTECH - Apexi Power FC - Nistune/Nissan Consult V1 (Skyline, Silvia/180-200-240SX, Micra) - ProEFI - Life Racing - DTAFast - DeltaSCS - Bigstuff3 - Telsa Small Drive Units

Stock ECU support over high speed canbus (not slow OBD2!):

- GM: Any GM/Holden vehicle from 2006 onwards (including LS and Duramax)
- Toyota GT86/BRZ/FR-S
- Ford: BA/BF/FG 6cyl/8cyl
- Nissan 350 + 370Z
- Subaru WRX 2008-2015
- Mitsubishi Lancer EVO X
- Nissan R35 GTR

(turn smartphone sideways into landscape mode to view sheet properly - use proper browser and not Facebook browser)

SUPPORTED SENSOR LIST - 2020

Serial based aftermarket ECUs:
ECU Type	Supported sensors
Apexi Power FC	Speed / RPM / Battery voltage/ knock / throttle position/ coolant temperature. Additional sensors can be wired to an FC hako interface cable and displayed digitally on the dash.
Nissan Consult/Nistune	Speed / RPM / Battery Voltage / Coolant Temperature / Throttle Position. Not possible to wire additional sensors via the ECU.

CAN based STOCK ECUs:
(cannot wire additional sensors to stock ECU)
ECU Type	Supported ECU manufacturer sensors
Toyota 86/BRZ/FR-S	Battery voltage / Fuel Leve l / MAP / Boost / Intake air temp / Ignition timing / Engine load (RPM) / Oil temp / Coolant temp / High beam / Low beam / Handbrake/ Clutch / Steering wheel angle / Traction control status / Wheel speed (all wheels) and overall speed / Accelerator pedal position /throttle % / Brake pressure.

Ford Barra BA/BF/FG	Speed / RPM / Throttle position / Coolant Temp / Oil temp (turbo models only) / AUTO Gear position / Battery voltage / Boost / MAP / Intake Temp / Gearbox Temp

GM/Holden - 2006 Onwards (Including LS and Duramax)	Speed / RPM / Boost / MAP / Brake % / Ethanol % / Fuel tank level % / Throttle position % / Intake Air Temp / Coolant Temp/ Transmission Oil Temp / Engine Oil Temp / Engine Oil Pressure

Subaru WRX 2008-2015	Speed / RPM / G forces / steering wheel angle / coolant temp / intake temp / MAP / accel pedal position / batt voltage / gear / fuel tank level

Mitsubishi EVO X	Speed / RPM / Coolant temp / Indicator L+R /

Nissan 350Z	Speed / RPM / Coolant Temp / Throttle Position

Nissan 370Z	Speed / RPM / Oil Temp / Coolant Temp / Gear Position / (wheel angle in some cases)

CAN based aftermarket ECUs:
ECU Type	Supported ECU manufacturer sensors
AEM	Anything that can be wired to the ECU and displayed via CAN - typically all engine data such as speed/ rpm/ temperatures/ pressures and any sensors that you wire directly to the ECU
Adaptronic Modular	Anything that can be wired to the ECU and displayed via CAN - typically all engine data such as speed/ rpm/ temperatures/ pressures and any sensors that you wire directly to the ECU
ECU Master	Anything that can be wired to the ECU and displayed via CAN - typically all engine data such as speed/ rpm/ temperatures/ pressures and any sensors that you wire directly to the ECU
Emtron	Anything that can be wired to the ECU and displayed via CAN - typically all engine data such as speed/ rpm/ temperatures/ pressures and any sensors that you wire directly to the ECU
Haltech	Anything that can be wired to the ECU and displayed via CAN - typically all engine data such as speed/ rpm/ temperatures/ pressures and any sensors that you wire directly to the ECU
Hondata	Anything that can be wired to the ECU and displayed via CAN - typically all engine data such as speed/ rpm/ temperatures/ pressures and any sensors that you wire directly to the ECU
MaxxECU	Anything that can be wired to the ECU and displayed via CAN - typically all engine data such as speed/ rpm/ temperatures/ pressures and any sensors that you wire directly to the ECU
Microtech	ECU does not contain speed data/ order GPS model for Microtech.The following Microtech sensors can be displayed: RPM / Oil Pressure / Coolant Temp / Fuel Pressure / Batt Voltage / Throttle Position / Manifold Pressure / Intake Air Temp / Lambda / Ignition Advance / Gear / Injector Timing / Ethanol content / EGT with Microtech CAN EGT box
Motec	Anything that can be wired to the ECU and displayed via CAN - typically all engine data such as speed/ rpm/ temperatures/ pressures and any sesors that you wire directly to the ECU
Link ECU	Anything that can be wired to the ECU and displayed via CAN - typically all engine data such as speed/ rpm/ temperatures/ pressures and any sensors that you wire directly to the ECU
Vipec	Anything that can be wired to the ECU and displayed via CAN - typically all engine data such as speed/ rpm/ temperatures/ pressures and any sensors that you wire directly to the ECU

Supported Sensors(old)

Are you at the right place ?